Safety Spring Cover for 305 cm Trampoline - 1280

Here's how to check if it's suitable for your existing trampoline:

• Outer diameter of the trampoline frame: 305 cm (sometimes this size is marked as "10 ft" on external boxes).
  • If the diameter of the trampoline is longer: the spring cover will be too small, not covering the outer edge of the springs perfectly.
  • If the diameter of the trampoline is shorter: the spring cover will overhang on the trampoline, not covering the inner edge of the springs perfectly.
• Length of the springs: about 14 cm(typically 138 mm from hook to hook).
  • If the springs are longer: the spring cover will not fully cover the springs during jumping.
  • If the springs are shorter: the spring cover will hang inwards over the springs. It does not cause any particular problem.
• The trampoline's poles should be placed outside the spring cover (in some brands, the poles penetrate the spring cover), and there are no holes in the spring cover for the poles.
• The spring cover is suitable for trampolines with internal netting (e.g., tied under or over the spring cover) or external netting (netting pulled over the poles).
• This is the most common spring cover, primarily made for S-SPORT and SPARTAN trampolines, but also suitable for PLUM (e.g., available at Tesco), CRANE (e.g., available at Aldi), AGA, and other brands that meet the above specifications.

Additional technical information:

• Blue colour
• About 26 cm wide padding and 8 cm wide edge (hanging over the frame's outer part)
• Top part is covered with UV resistant PVC
• Bottom part is made of 130 g/m2 density, laminated polyethylene material on both sides
• Padding: 11 mm thickness, EPE foam, in a 6+5 mm layer

Warranty for the spring cover's wear parts is only provided in case of manufacturing defects. Damage, wear, and tears resulting from usage are not covered by the warranty.